 |
Product Description
604kg · Cr 41,000N / Cor 51,000N · GCr15 / 52100 · Rolling Mills · Mining · Energy · Gearboxes
Parameter | Value |
Part Number | 3519/800 |
Cross Reference | 10979/800 |
Type | Double Row Tapered Roller Bearing |
Bore (d) | 800 mm |
OD (D) | 1060 mm |
Width (B) | 270 mm |
Weight | 604 kg |
Dynamic Load Rating (Cr) | 41,000 N |
Static Load Rating (Cor) | 51,000 N |
Material | GCr15 / AISI 52100 / 100Cr16 / SUJ2 / 683/XVIII / SKF3 |
Precision | ABEC-1/3/5/7/9 · DIN620 P0/P6/P5/P4/P2 |
Clearance | C0 / C2 / C3 / C4 / C5 |
Sealing | Open (standard) · 2RS / ZZ on request |
HS Code | 8482800000 |
Brand | Nexans Bearings |
The 3519/800 (10979/800) is an 800×1060×270mm double row tapered roller bearing weighing 604kg. Both designations refer to the identical bearing — 3519/800 is the GB/ISO standard; 10979/800 is the alternative cross-reference.
Steps up from the 3519/750 (499kg) by +50mm bore, +60mm OD, +6mm width, +105kg — the upper large-bore tier of the 3519 series, one step below the series apex 3519/900.
Internal construction: double cup + two cones + optional spacer — separable, field-maintainable without special tools.
Industry | Typical Use | Selection Reason |
Steel & Rolling Mills | Work/backup roll necks, pinion stands, coiler mandrels | High combined load; shock & vibration resistance |
Mining & Minerals | Crusher mainshafts, SAG/ball mill trunnions, conveyor drives | Contaminated environment; impact loads; misalignment |
Energy & Power Generation | Wind turbine main shafts, large generator rotor support | High static load; low-speed high-torque; long maintenance intervals |
Heavy Industrial Gearboxes | Large output / intermediate shafts, planetary stages | Bidirectional axial load; high rigidity |
Hoisting & Lifting | Crane slewing rings, winch drums, offshore drawworks | Combined load; high static capacity; cyclic reliability |
Paper & Pulp Machinery | Large press roll necks, dryer / calendar rolls | High radial load; continuous operation; moisture resistance |
3519/750 | 3519/800 | 3519/900 | |
Bore (d) | 750 mm | 800 mm | 900 mm |
OD (D) | 1000 mm | 1060 mm | 1180 mm |
Width (B) | 264 mm | 270 mm | 275 mm |
Weight | 499 kg | 604 kg | 728 kg |
Cr / Cor | 41,000 / 51,000 N | 41,000 / 51,000 N | 41,000 / 51,000 N |
The three bearings are not interchangeable — always verify bore, OD, and width against your equipment drawing.
Part No. | Bore | OD | Width | Weight |
3519/530 | 530 mm | 710 mm | 243 mm | ~260 kg |
3519/560 | 560 mm | 750 mm | 213 mm | 235 kg |
3519/600 | 600 mm | 800 mm | 205 mm | 266 kg |
3519/630 | 630 mm | 820 mm | 242 mm | 368 kg |
3519/670 | 670 mm | 900 mm | 240 mm | 416 kg |
3519/710 | 710 mm | 950 mm | 240 mm | 445 kg |
3519/750 | 750 mm | 1000 mm | 264 mm | 499 kg |
3519/800(this) | 800 mm | 1060 mm | 270 mm | 604 kg |
3519/900 | 900 mm | 1180 mm | 275 mm | 728 kg |
Parameter | Value | Notes |
Dynamic Cr | 41,000 N | L10 fatigue life basis |
Static Cor | 51,000 N | Max load without permanent deformation |
Clearance | C0/C2/C3/C4/C5 | C3/C4 for impact / elevated temperature |
Lubrication | Grease or circulating oil | ISO VG 220–460 (mills/gearboxes); EP NLGI 2–3 (mining/energy) |
Temperature | –30°C to +120°C | Heat-stabilized steel on request for extended range |
Certification | ISO9001 / IATF16949 | Material certs, dimensional reports, load rating reports per batch |
Q: 3519/800 vs 10979/800 — what's the difference?
Same bearing. 3519/800 = GB/ISO designation. 10979/800 = alternative cross-reference.
Q: How does the 3519/800 compare to the 3519/750?
+50mm bore, +60mm OD, +6mm width, +105kg. Specified by shaft diameter — if your shaft is 750mm, see the 3519/750.
Q: How does the 3519/800 compare to the 3519/900?
The 3519/900 adds +100mm bore, +120mm OD, +5mm width, +124kg. If your shaft is 900mm, see the 3519/900.
Q: What precision grade is required?
P0 / ABEC-1 — gearboxes, mining, hoisting, energy (standard)
P6 / ABEC-3 — paper machinery, speed reducers
P5 / ABEC-5 — rolling mill finishing stands, precision gearboxes
P4 / P2 — high-precision applications; confirm with OEM equipment data
Q: Lubrication — rolling mill vs mining?
Rolling mills: open configuration, circulating oil ISO VG 220–460 — continuous delivery, heat removal, contamination flushing. Mining / outdoor: ZZ or 2RS with EP-additive grease NLGI Grade 2–3. Confirm with OEM equipment manual.
Q: Recommended clearance for crusher / high-temperature applications?
C3 or C4 — accommodates thermal expansion and prevents preload under impact. C0 for standard gearbox service at ambient temperature.
Q: What documentation is available?
GCr15 / AISI 52100 material certificates, dimensional inspection reports, load rating test reports, packing lists, commercial invoices, certificates of origin. ISO9001 / IATF16949 certified supply chain. SGS / BV / TÜV third-party inspection supported.
Q: MOQ and lead time?
MOQ: 1 piece for stock items. Lead time: 5–7 business days (stock); confirmed at order for made-to-order. FOB Qingdao / CIF / EXW. Full wooden crating and heavy-lift documentation included at 604kg unit weight.
Q: OEM / private label available?
Yes — custom box artwork, laser-engraved logo on bearing ring, fully branded packaging. All IP rights belong to you. MOQ and pricing on request.
Website | |
+86-155-6283-9480 | |
Location | Liaocheng, Shandong, China |
