Product Description
UCP215-75MM has a combination of a cast iron pillow block housing with an anti-rotation device with self-alignment and a set screw locking chrome steel insert bearing with a slinger seal design. This specific unit is a standard duty pillow block bearing with a wide inner ring and two set screws and a cast iron unit with the standard base to center height with a grease fitting.
UCP 215-75MM Dimensions
Unit | Shaft Dia | h | a | e | b | S2 | S1 | g | w | Bi | n | Bolt Size |
inch | 3 1/4 | 10 53/64 | 8 17/32 | 2 29/32 | 1 3/32 | 63/64 | 1 3/32 | 6 3/8 | 3.0630 | 1.3110 | M20 | |
mm | 75 | 82.6 | 275 | 216.7 | 73.8 | 28 | 25 | 28 | 162 | 77.8 | 33.3 | 3/4 |
Interchange List
Pre-Lube | |
PEER | UCP215-75 |
BROWNING | VPS |
AMI/ASAHI | UCP215-75 |
NTN | UCP215-300D1 |
SEAL MASTER | NP-215 |
DODGE DESCRIPTION | P2B-SC-75M |
LINK-BELT | P3-U2M75N |
FARNIR | YAS-75 |