Use the references below to find a starting point for your inquiry. Check the individual product information and confirm the required configuration before ordering.
Catalogue group | Selected references | Details to confirm |
|---|---|---|
Drawn cup needle roller bearings | HK5025; HK4520 | Dimensions, end design, sealing and shaft raceway requirements |
NK-series radial needle bearings | NK38/20; NK60/25; NK55/35 | Bearing arrangement, mating shaft and housing dimensions |
Other radial needle bearing references | K253324; KT162216 | Assembly construction, dimensions and application |
Full-complement needle bearings | 943/30; 94908 | Operating conditions, lubrication and mounting arrangement |
Automotive repair-kit references | KS559.01 | Vehicle application, OE references, component numbers and quantity per kit |
Do not treat references grouped on this page as interchangeable parts. Final selection depends on the drawing, construction and operating conditions.
Needle roller bearings provide a compact bearing arrangement where radial space is limited. The construction determines how the bearing is mounted and which mating surfaces are required.
Drawn cup bearings have a thin, formed outer ring. Solid-ring designs use a machined outer ring. Needle roller and cage assemblies require suitable mating raceways because they do not include bearing rings. Identify the construction before comparing dimensions or requesting a replacement.
For arrangements without an inner ring, the shaft may act as the raceway. Confirm its material condition, hardness, surface finish and geometry against the bearing requirements. If an inner ring is required, include it in the requested assembly and drawing review.
Caged and full-complement designs also require separate evaluation. Compare the load and speed requirements for the specific part. A matching outside envelope alone does not establish equivalent operating performance.
Follow the dimension symbols on the applicable drawing. A shaft raceway diameter is not necessarily an inner-ring bore, and a bare roller assembly is not the same construction as a complete bearing with rings.
State whether dimensions are metric or inch. Keep the original designation and units when requesting a cross-reference, and include any suffixes shown on the bearing or packaging. Provide a drawing when a product has several stepped diameters or an unusual assembly length.
Radial needle bearings and thrust needle bearings serve different load directions. If your application has axial loading, include it in the selection review; do not assume a radial needle bearing supports the complete load arrangement.
Include rotation or oscillation, operating speed, load information, temperature, lubrication and exposure to contamination. These details help define the technical questions that must be resolved before an order.
For automotive replacements, a vehicle brand or a similar-looking bearing is insufficient to confirm fitment. Supply the vehicle model, model year, installation position and available OE reference, together with the original bearing marking.
For repair kits, confirm the individual component numbers and quantities. State whether you need bearings only or additional seals and related parts. Check the agreed kit contents in the quotation before placing the order.
Where the shaft or surrounding assembly forms part of the bearing arrangement, its condition must also be assessed during repair. Replacing a bearing does not establish that the existing mating surfaces remain suitable.
Send the following details with your request. If you have several items, a part-number list with quantities is useful for reviewing the order line by line.
RFQ information | What to provide |
|---|---|
Identification | Complete part number, suffix, original marking and drawing where available |
Construction | Required rings, cage or full-complement design, open or closed end, and seals |
Dimensions | Drawing dimensions and units, including mating shaft and housing information |
Application | Equipment or vehicle details, installation position and operating conditions |
Quantity | Quantity per item, trial-order needs and expected repeat demand |
Quality requirements | Required inspection characteristics, acceptance criteria and documentation |
Delivery and packing | Destination, requested delivery date, packaging and label requirements |
Minimum order quantity, availability, price and delivery timing should be confirmed for the exact item and order quantity. Request any inspection records, material documentation or traceability information needed for supplier approval at the quotation stage, so the available scope can be established.
Can a needle roller bearing run directly on a shaft?
Some arrangements use the shaft as the raceway. This requires a suitable shaft surface and geometry. Confirm the raceway requirements before choosing a bearing without an inner ring or replacing an existing assembly.
Are bearings with the same dimensions interchangeable?
Not automatically. Ring arrangement, cage construction, sealing and application requirements can differ. Compare the complete designation and drawing before approving a substitute.
Are all needle roller bearings suitable for axial loads?
No. Radial and thrust needle bearings have different functions. Confirm the load direction and the complete bearing arrangement for the application.
How should I request an inch-size bearing?
Provide the original inch designation, dimensions and drawing where available. For reference, 3/4 inch equals 19.05 mm, but a unit conversion alone does not confirm interchangeability with another bearing.
What information is needed for an automotive repair kit?
Provide the vehicle model and year, installation position, OE references and original bearing markings. Confirm every component and its quantity against the quoted kit contents.
How can I request a price and delivery estimate?
Send the complete part number, quantity, destination and technical requirements. Include drawings or photographs of markings where available, and identify any documents needed with the order.
Share your part list, drawing or replacement reference with Nexans Bearing to request a quotation for your required configuration.