UCP214-70MM Pillow Block Bearing 70mm Metric Bore | Cast Iron Housing | Cr≈46.8–60.8kN | Self-Aligning | Double Sealed | Set Screw Locking

The UCP214-70MM is a standard duty Cast Iron Pillow Block Bearing Unit from the UCP200 series, designed for a 70mm metric bore shaft. It combines a robust grey cast iron housing with an anti-rotation device, self-alignment capability (typically ±2–3°), and a UC214-70MM chrome steel insert bearing featuring a slinger double-seal design and two set screw shaft locking mechanism.

With a dynamic load rating of Cr ≈ 46.8–60.8 kN and static load rating of Co ≈ 45.0 kN (10,116 lbf) — confirmed across maedlernorthamerica.com and globalindustrial.com (Tritan) — the UCP214-70MM delivers reliable radial load capacity for 70mm metric shaft applications across European, Asian, and global industrial machinery.

The standard grease fitting (Zerk fitting) allows for in-service relubrication without disassembly, extending service life in demanding environments. The grey cast iron housing provides excellent rigidity and vibration damping, while the self-aligning insert bearing design compensates for shaft misalignment. At ≈14.5–15.6 lbs (6.6–7.1 kg), the UCP214-70MM is a robust yet manageable unit for field installation.

Product Specifications

Key Features & Engineering Advantages

• ✅ 70mm Metric Bore — Standard European/Asian Shaft Size — The 70mm bore is a widely standardized metric shaft diameter in European, Asian, and global industrial machinery; the "-70MM" suffix clearly designates the metric bore, distinguishing it from the inch-bore UCP214-44 (2-3/4") variant sharing the same housing

• ✅ Cr≈46.8–60.8kN / Co≈45.0kN (Multi-Source Confirmed) — Load capacity confirmed across maedlernorthamerica.com and globalindustrial.com (Tritan), ensuring reliable performance in heavy radial load applications for 70mm shaft machinery

• ✅ Compact UCP214 Housing vs UCP215 — The UCP214 housing is slightly more compact than UCP215 (266mm vs 275mm length, 156.4mm vs 162mm width, 79.4mm vs 82.6mm center height), making it ideal for space-constrained installations requiring a 70mm bore

• ✅ Cast Iron Housing with Anti-Rotation Device — Grey cast iron housing provides excellent vibration damping and structural integrity; anti-rotation pin prevents insert bearing rotation within housing under shock loads

• ✅ Self-Aligning Design (±2–3°) — Compensates for shaft misalignment, reducing bearing stress and extending service life in imperfectly aligned shaft installations

• ✅ Double Sealed + Slinger Seal — Triple-layer sealing system provides superior protection against dust, dirt, moisture, and contaminants in harsh outdoor and industrial environments

• ✅ Two Set Screw Locking — Dual set screws in the wide inner ring provide positive shaft locking and prevent axial displacement under heavy loads and vibration

• ✅ Standard Grease Fitting (Zerk) — Allows convenient in-service relubrication without disassembly, critical for extended maintenance intervals in remote or hard-to-access installations

• ✅ Wide Inner Ring (Bi=74.6mm / 2.937 in) — Extended inner ring width provides greater shaft contact area, improving set screw grip and reducing shaft fretting

• ✅ Exceptionally Wide Interchange List (8+ Brands) — Directly interchangeable with DODGE P2B-SC-70M, LINK-BELT P3-U2M70N, AMI/ASAHI, PEER, NTN, BROWNING, FARNIR YAS 70, and Seal Master NP-214 — ensuring easy global sourcing and replacement

• ✅ Standard M20 / 3/4" Bolt Size — Standard bolt pattern ensures direct drop-in replacement for any existing UCP214-70MM installation from any brand

• ✅ GCr15 / 52100 Chrome Steel Insert — Premium chrome steel insert bearing with HRC 60–64 hardness for exceptional wear resistance and fatigue life

Typical Applications

Based on the UCP214-70MM's 70mm metric bore, Cr≈46.8–60.8kN, double-sealed cast iron housing, and self-aligning design:

Cross Reference / Interchange

UCP214-70MM vs UCP214-44 vs UCP215-75MM — Key Differences

⚠️ Critical Note: The UCP214-70MM and UCP214-44 share the exact same UCP214 housing and bolt pattern, but their insert bearings have different bore sizes (70.0mm vs 69.85mm). Despite the very close bore dimensions, these are NOT shaft-interchangeable — always specify "-70MM" for 70mm metric shafts. For 75mm metric shafts, the UCP215-75MM (larger UCP215 housing) is required.

Series Context — UCP214-70MM within the UCP200 Pillow Block Series

Key Series Insights:The "-70MM" suffix explicitly designates a 70mm metric bore, distinguishing it from the inch-bore UCP214-44 (2-3/4" = 69.85mm) that shares the same UCP214 housingThe UCP214-70MM uses a slightly more compact housing than the UCP215 series (266mm vs 275mm length), making it the preferred choice when installation space is limited and a 70mm bore is requiredThe 8+ brand interchange list including DODGE P2B-SC-70M and LINK-BELT P3-U2M70N confirms UCP214-70MM as a globally standardized 70mm pillow block unitThe "70MM" designation in the model name is critical for global search and ordering — always use the full model number "UCP214-70MM" to avoid confusion with the inch-bore UCP214-44

Export & Logistics Notes for UCP214-70MM

• Standard Export Packaging — Individual box + outer carton or custom packaging per customer requirements; ≈6.6–7.1kg units individually wrapped for protection

• Fast Delivery — Standard orders: 3–7 days from stock; DHL/FedEx/UPS express available (VIP member rates ~15% savings)

• Global Shipping — LCL/FCL ocean freight, air freight, express courier — all options available

• Full Export Documentation — Certificate of Origin (CO), material certificates, quality inspection reports, packing lists

• OEM / Private Label — Custom branding & packaging available for distributors and OEM customers

• Technical Support — 24-hour online technical support for installation, lubrication, and application engineering

• Global Network — Offices/agents in 30+ countries and regions

Why Choose NEXAN

S Bearing for UCP214-70MM?

Since 1997, Liaocheng Nexans Bearing Co., Ltd has been a trusted factory-direct manufacturer and global supplier of pillow block bearings and housed bearing units across agricultural, industrial, construction, and conveyor sectors.

• Factory-Direct Pricing — No middlemen, competitive wholesale rates

• Large Ready Stock — 20,000+ bearing models in inventory, including full UCP200 series in both inch and metric bore variants

• Flexible MOQ — Single-unit replacement orders to bulk OEM contracts

• OEM / Private Label — Custom branding & packaging available

• Full Export Documentation — CO, quality certificates, professional export packaging

• Global Network — Offices/agents in 30+ countries and regions

• 24/7 Technical Support — Expert application engineering support for shaft fit, bore selection (inch vs metric), lubrication, and mounting recommendations

Get a Quote Now

Email: export@nksbearing.com WhatsApp: +86-15562839480 Website: www.nksbearing.com

NEXANS Bearing — Your trusted factory-direct partner for pillow block bearings and housed bearing units since 1997.