DAC35650035ZZ Front Wheel Bearing | 35×65×35mm | Double Shield | Iran Market | Peugeot / Samand / Pars / IKCO | NEXANS Bearing

The DAC35650035ZZ is a double-shield (ZZ) front wheel hub bearing with dimensions 35mm bore × 65mm OD × 35mm width, specifically engineered and stocked by NEXANS Bearing for the Iran automotive market. The "DAC" prefix denotes Double Angular Contact ball bearing design — the standard configuration for modern automotive front wheel bearing applications, providing simultaneous radial and bidirectional axial load capacity essential for cornering and braking forces at the wheel hub.

The "ZZ" suffix designates double metal shields on both sides — providing effective protection against dust and debris ingress while retaining factory-applied grease for a maintenance-free, pre-lubricated service life. Manufactured from Chrome Steel GCr15 (equivalent to AISI 52100), the DAC35650035ZZ delivers the hardness, wear resistance, and fatigue life required for front wheel hub duty in Iran's diverse road and climate conditions.

NEXANS Bearing explicitly positions this bearing for the Iran market — reflecting the large installed base of Peugeot 405, Samand, Pars, and IKCO platform vehicles in Iran, all of which share the 35×65×35mm front wheel bearing specification.

Product Specifications

ZZ Shield Note: The ZZ (double metal shield) design is preferred over RS (rubber seal) in Iran market applications due to its superior resistance to fine desert dust and sand ingress — a critical consideration for vehicles operating in Iran's arid central and southern regions.

Width Note: The 35mm width of the DAC35650035ZZ is notably wider than many DAC bearings of similar bore size (e.g., DAC35640037 at 37mm width but 64mm OD). This wider design provides greater axial load capacity and stiffness — important for the heavier front axle loads of Peugeot 405 and IKCO platform vehicles.

Cross Reference / Interchange

SKF Cross-Reference Note: The SKF equivalents BT2B445620B and 546238A are both confirmed on the NEXANS official product page — BT2B445620B is SKF's standard DAC series designation while 546238A is an alternative SKF catalogue number for the same bearing. Both confirm 35×65×35mm dimensions.

DAC35 Series — Full Interchange Table

(From NEXANS official product page — complete DAC35 wheel bearing cross-reference series)

Series Positioning: Within the DAC35 family, the DAC35650035 (35×65×35mm, 0.40 kg) occupies a mid-range position — wider than the DAC35660032 (32mm) and DAC35660033 (33mm) variants, reflecting its specific engineering for heavier front axle loads on Peugeot/IKCO platform vehicles.

Vehicle Fitment Guide — Iran Market Focus

Iran Market Context: Iran is one of the world's largest markets for Peugeot 405 — with over 2 million units produced locally by IKCO (Iran Khodro). The Peugeot 405 platform also underpins the Samand, Pars, Runna, and Dena models — meaning the DAC35650035ZZ is one of the highest-volume front wheel bearings in the Iranian aftermarket. NEXANS's dedicated Iran market stocking of this bearing reflects this massive demand.

DAC35650035ZZ vs Nearby DAC35 Variants — Comparison

⚠️Critical Fitment Warning: All four DAC35 variants above share the same 35mm bore but have different OD and width dimensions — they are NOT interchangeable. Always verify all three dimensions (35×65×35mm) before ordering. Using a DAC35660032 (66mm OD) in a housing designed for DAC35650035 (65mm OD) will result in incorrect fit and premature bearing failure.

Key Features & Engineering Advantages

• ✅ Iran Market Dedicated Stock — NEXANS explicitly stocks and markets the DAC35650035ZZ for the Iran automotive market — ensuring availability for the massive Peugeot 405 / IKCO platform installed base

• ✅ ZZ Double Metal Shield — Superior dust and debris protection vs rubber seals; ideal for Iran's arid desert road conditions; retains factory grease for maintenance-free service

• ✅ Chrome Steel GCr15 (AISI 52100) — Industry-standard bearing steel providing optimal hardness (HRC 60–65), wear resistance, and rolling fatigue life — independently confirmed by two sources

• ✅ 100% Quality Tested — Each bearing individually tested before shipment — confirmed by ING Bearing / WXing Group independent source

• ✅ DAC Double Angular Contact Design — Provides simultaneous radial + bidirectional axial load capacity essential for front wheel hub cornering and braking forces

• ✅ Precision Dimensions 35×65×35mm — Confirmed by 4 independent sources; ensures direct drop-in replacement with no modification required

• ✅ Multi-Brand Interchange — Direct equivalent to KOYO DAC35650035, SKF BT2B445620B / 546238A, FAG, NSK, NTN equivalents

• ✅ Pre-lubricated, Maintenance-Free — Factory-applied grease eliminates field lubrication requirements — critical for Iran market where service infrastructure varies

• ✅ 12–24 Month Warranty — Confirmed by multiple independent sources

• ✅ Complete DAC35 Series Available — NEXANS supplies the full DAC35 wheel bearing series for comprehensive Iran and global automotive aftermarket coverage

• ✅ Fast Delivery 1–5 Days — Large ready stock confirmed by KOYO-brand equivalent source; NEXANS 3,000m² warehouse ensures fast dispatch

FAQ

Q1: What vehicles does the DAC35650035ZZ fit in Iran?

The DAC35650035ZZ is the standard front wheel hub bearing for Peugeot 405 (all Iran variants), IKCO Samand (LX/EL/SE), IKCO Pars (ELX/LX), IKCO Runna, IKCO Dena, and Peugeot 206 SD (Iran-assembled). All these models share the Peugeot 405 platform architecture with 35×65×35mm front wheel bearing specification.

Q2: What does "ZZ" mean in DAC35650035ZZ?

ZZ designates double metal shields on both sides of the bearing. This provides effective protection against dust and debris ingress while retaining factory-applied grease — resulting in a maintenance-free, pre-lubricated bearing. The ZZ design is particularly suited to Iran's arid road conditions.

Q3: What are the exact dimensions of the DAC35650035ZZ?

Inner Diameter 35mm × Outer Diameter 65mm × Width 35mm. Confirmed independently by 4 separate sources.

Q4: What is the SKF equivalent of DAC35650035ZZ?

The SKF equivalents are BT2B445620B and 546238A — both confirmed on the NEXANS official product page as direct cross-references for the 35×65×35mm specification.

Q5: What is the KOYO equivalent of DAC35650035ZZ?

The direct KOYO equivalent is DAC35650035 (without ZZ suffix) — confirmed by TFL Bearing as a 35×65×35mm auto car wheel hub bearing with identical specifications.

Q6: Can I use DAC35660032 instead of DAC35650035ZZ?

❌No — these are NOT interchangeable. The DAC35660032 has OD=66mm vs DAC35650035ZZ's OD=65mm. Installing a 66mm OD bearing in a 65mm housing bore will result in incorrect fit and bearing failure. Always verify all three dimensions.

Q7: What material is the DAC35650035ZZ made from?

Chrome Steel GCr15 (international equivalent: AISI 52100 / 100Cr6) — the industry-standard bearing steel providing HRC 60–65 hardness, excellent wear resistance, and long rolling fatigue life. Confirmed by two independent sources.

Q8: Does NEXANS supply other DAC35 series bearings?

✅ Yes. NEXANS supplies the complete DAC35 series — from DAC34670037 through DAC35660033 — covering all major Iran market and global automotive front wheel bearing applications.

Q9: Is OEM/private label available?

✅ Yes. NEXANS Bearing provides full OEM and private label services — custom branding, packaging, and documentation. Agents established in 30+ countries.

Get a Quote Now

Email: export@nksbearing.comWhatsApp: +86-15562839480
Website: www.nksbearing.com

NEXANS Bearing — Factory-direct partner for Iran market wheel bearings, DAC bearings, and industrial bearing solutions since 1997.